Concrete contractor in Tarzana California
All Concrete Projects in Tarzana, California
Installations, Additions, Remodel & Repair
Curious for an trained concrete company you can trust? Turn to the experienced team at Royal Concrete Works Contractors. We care complete residential and commercial concrete installation services throughout Tarzana and the surrounding communities.
We offer wide concrete services, including driveways, walkways, pool decks, patios, commercial installation, and much more.
To learn more about the residential and commercial concrete installation services we offer, get in touch with Royal Concrete Works Contractors right now .
Give us a call at (323)827-8577 to request a project estimate .i
Royal Concrete Works, work for Tarzana , offers beautiful & charming concrete surfaces. We do it very well.
Taking pride in their work, our concrete artisans work with concrete and stamped concrete surfaces. There is never a job we won’t take .
REQUEST SERVICE ONLINE
You will be contacted by a representative after filling out the form below.
How a concrete job is through in Tarzana Step by Step?
after we decide what materials, we will use. like:
concrete PSI, concrete thick, rebar size the concrete will be.
We demonstrate below how this work should be completed properly:
decide on the finishes and style
Before starting the actual work, you need to establish what style you want and what finishes you expect. The ideal in these cases is to create a sketch to determine what needs to be done and choose the Pattern you want to use in case you need a printed concrete.
Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.
Specialized equipment, such as rollers or presses, will be needed for the soil compaction process. To level the land, it may occasionally be required to remove or add dirt
Coverage of the ground:
The surface needs to be covered with plastic after the prior steps have been finished. In order to keep transpiration from getting on the concrete, this is done.
Getting ready for the concrete's application:
The work with concrete now starts. The preparation is the first step , depending on the size of the surface will determine the exact amounts, but usually correspond to one part of cement , three parts of sand, four parts of gravel and 0.5 parts of water. The following step will be its implementation , It is poured on top of that for that , So that the area is uniform, it should be spread and smoothed.
If it is desired to add a color to the concrete this is the moment. For the color to be thoroughly incorporated, these pigments should be sprinkled on the concrete and given at least two hours to work.
Stamping the designs:
Perfect steps must be made by the pattern on the concrete, The requirement that the concrete be in a plastic state must be made clear , hence it must also be applied pressure to it . It is also important that it is always done in the same direction and that it is done in rows. The following step is to give it at least 72 hours to dry.
the removal of expansion joints
This should be done when the concrete is completely dry ; For this job, a radial saw with a stone disc can be helpful.