Concrete contractor in Santa Clarita California

You must decide on the style and finishes you desire before beginning the actual work. The ideal in these cases is to create a sketch to determine what needs to be done and choose the Pattern you want to use in case you need a printed concrete.

Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.

Specialized instruments like rollers or presses are needed for the soil compaction process. When attempting to level the ground, it may be required to add or remove soil.

The surface needs to be covered with plastic after the prior steps have been finished. By doing this, the transpiration is kept from getting to the concrete.

The concrete work starts at this point.     The preparation is the first step , The size of the surface will determine the precise amounts , but usually correspond to one part of cement , 3 portions of sand , four parts of gravel and 0.5 parts of water.  The following step will be its implementation , It is poured on top of that for that , In order to make the area uniform, it should be spread out and smoothed.

This is the time, if you want to give the concrete some color.   For the color to be well incorporated, these pigments should be sprinkled on the concrete and allowed to act for at least two hours.

A perfect step on the concrete must be achieved with the pattern, It is important to note that the concrete needs to be in a plastic state. , hence it must also be applied pressure to it . It is also important that it is always done in the same direction and that it is done in rows. The next step is to let it dry for at least 72 hours.

When the concrete is completely dry, you should do this. ; For this job, a radial saw with a stone disc can be helpful.