Concrete contractor in San Fernando California
All Concrete Projects in San Fernando, California
Installations, Additions, Remodel & Repair
inquiring for an competent concrete company you can trust? Turn to the wise team at Royal Concrete Works Contractors. We care complete residential and commercial concrete installation services throughout San Fernando and the surrounding communities.
We offer comprehensive concrete services, including driveways, walkways, pool decks, patios, commercial installation, and much more.
To find out also about our residential and commercial concrete installation services, get in touch with Royal Concrete Works Contractors now .
Give us a call at (323)827-8577 to request a project estimate .i
Royal Concrete Works, work for San Fernando , provides beautiful & delightful concrete surfaces . We do it very well.
Taking pride in their work, our concrete artisans work with concrete and stamped concrete surfaces. No job is too small for us .
REQUEST SERVICE ONLINE
fill out the form below and a representative will contact you.
How a concrete job is realized in San Fernando Step by Step?
after we decide what materials, we will use. like:
concrete PSI, concrete thick, rebar size the concrete will be.
We demonstrate how this work should be done correctly in the sections below:
decide on the finishes and style
Establishing the style and expected finishes is necessary before beginning the actual work. In these situations, planning out what needs to be done and selecting a pattern to utilize in case you need to print concrete .
Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.
The soil compaction process will require special tools such as rollers or presses. In some cases it will be necessary to remove or add soil in order to level the ground.
The surface needs to be covered with plastic after the prior steps have been finished. This is done in order to prevent the transpiration from reaching the concrete.
concrete preparation and application:
The concrete work starts at this point. The preparation is done first., The size of the surface will determine the precise amounts , but usually correspond to one part of cement , 3 portions of sand , four parts of gravel and 0.5 parts of water. The following step will be its implementation , For that, it is poured on top , it should be spread and smoothed so that the entire area is uniform.
This is the time, if you want to give the concrete some color. For the color to be well incorporated, these pigments should be sprinkled on the concrete and allowed to act for at least two hours.
Patterns are stamped:
Perfect steps must be made by the pattern on the concrete, It is important to note that the concrete needs to be in a plastic state. , hence it must also be applied pressure to it . It is also important that it is always done in the same direction and that it is done in rows. Let it dry for at least 72 hours before
Cutting of expansion joints:
When the concrete is completely dry, you should do this. ; An effective tool for this job is a radial saw with a stone disc.
Contact us to find out more about our offerings , To learn more about our services, get in touch with us. (323)827-8577