Concrete contractor Serving Reseda California

Establishing the style and expected finishes is necessary before beginning the actual work. In these situations, planning out what needs to be done and selecting a pattern to utilize in case you need to print concrete .

Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.

Specialized equipment, such as rollers or presses, will be needed for the soil compaction process. To level the land, it may occasionally be required to remove or add dirt

The surface needs to be covered with plastic after the prior steps have been finished. This is done to keep transpiration from getting on the concrete.

At this point the concrete work begins.    The first thing is its preparation, The size of the surface will determine the precise amounts , but usually correspond to one part of cement , three parts of sand, four parts of gravel and 0.5 parts of water.  The following step will be its implementation , It is poured on top of that for that , So that it covers the entire area evenly, spread and smooth it out.

If it is desired to add a color to the concrete this is the moment. These pigments should be sprinkled on the concrete and left to act for at least two hours for the color to be well integrated.

The pattern needs to be precisely designed to step on the concrete, The requirement that the concrete be in a plastic state must be made clear , Consequently, it must also be applied pressure to it. It is also crucial that it be carried out in rows and in the same direction at all times. Let it air dry for at least 72 hours before moving on. continuing.

This should be done when the concrete is completely dry ; For this job, a radial saw with a stone disc can be helpful.