Concrete contractor Serving Porter Ranch California

Before starting the actual work, you need to establish what style you want and what finishes you expect. The ideal in these cases is to create a sketch to determine what needs to be done and choose the Pattern you want to use in case you need a printed concrete.

Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.

Tools like rollers or presses are needed specifically for the soil compaction process. Sometimes it will be required to add or remove soil to level the ground.

  It is necessary to cover the surface with plastic after the prior steps have been finished. This is done to keep transpiration from getting on the concrete.

At this point the concrete work begins.     The preparation comes first , depending on the size of the surface will determine the exact amounts, but often equal one ingredient of cement , three parts of sand, four parts of gravel and 0.5 parts of water.  The following step will be its implementation , for that it is poured on the surface , So that it covers the entire area evenly, spread and smooth it out.

This is the time, if you want to give the concrete some color.   For the color to be well incorporated, these pigments should be sprinkled on the concrete and allowed to act for at least two hours.

The pattern needs to be precisely designed to step on the concrete, It is important to note that the concrete needs to be in a plastic state. , hence it must also be applied pressure to it . Additionally, it is crucial that it always be done in rows and in the same direction. Let it air dry for at least 72 hours before moving on. continuing.

The concrete must be completely dry before doing this  ; For this job, a radial saw with a stone disc can be helpful.