Concrete contractor in Pacoima California

You must decide on the style and finishes you desire before beginning the actual work. The ideal in these cases is to create a sketch to determine what needs to be done and choose the Pattern you want to use in case you need a printed concrete.

Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.

Specialized equipment, such as rollers or presses, will be needed for the soil compaction process. To level the land, it may occasionally be required to remove or add dirt

Once the previous steps have been completed, it is necessary to cover the surface with plastic. This is done in order to prevent the transpiration from reaching the concrete.

The work with concrete now starts.     The preparation is the first step , the exact quantities will depend on the dimensions of the surface , but generally equate to one part of cement, three portions of sand, four parts of gravel and 0.5 parts of water.  Application of the technology will come next, It is poured on top of that for that , So that the area is uniform, it should be spread and smoothed.

This is the time, if wanted, to add color to the concrete. For the color to be thoroughly incorporated, these pigments should be sprinkled on the concrete and given at least two hours to work.

Perfect steps must be made by the pattern on the concrete, The requirement that the concrete be in a plastic state must be made clear , hence it must also be applied pressure to it . It is also important that it is always done in the same direction and that it is done in rows. Let it air dry for at least 72 hours before moving on. continuing.

The concrete must be completely dry before doing this  ; For this job, a radial saw with a stone disc can be helpful.