Concrete contractor Serving Chatsworth California

You must decide on the style and finishes you desire before beginning the actual work. The ideal in these cases is to create a sketch to determine what needs to be done and choose the Pattern you want to use in case you need a printed concrete.

Yes, this is also a very important step. It is important to keep the area completely clean and clear to improve the adherence of the concrete and of course to obtain a better finish.

Specialized equipment, such as rollers or presses, will be needed for the soil compaction process. To level the land, it may occasionally be required to remove or add dirt

Once the previous steps have been completed, it is necessary to cover the surface with plastic. By doing this, the transpiration is kept from getting to the concrete.

The concrete work starts at this point.     The preparation is done first., the exact quantities will depend on the dimensions of the surface , but often equal one ingredient of cement , 3 portions of sand , four parts of gravel and 0.5 parts of water.  The next thing will be its application ,   For that, it is poured on top , it should be spread and smoothed so that the entire area is uniform.

This is the time, if you want to give the concrete some color.   For the color to be well incorporated, these pigments should be sprinkled on the concrete and allowed to act for at least two hours.

Perfect steps must be made by the pattern on the concrete, it is necessary to point out that the concrete must be in a plastic state , Consequently, it must also be applied pressure to it. It is also crucial that it be carried out in rows and in the same direction at all times. Let it dry for at least 72 hours before

When the concrete is totally dry, you should do this ; This job may benefit from the use of a radial saw with a stone disc.